 |
|
|
| Engisoft installation instructions for headlight ring models W203, W210, W208, W163
|
IMPORTANT NOTES:
With a commercially available glass cleaner and soft cloth, please remove all silicone, wax and dirt residues from the adhesion areas of the headlight surface.
The headlight rings may only be affixed at a room temperature of approximately 72 of (21°C), or warmer. The vehicle headlight lens surface itself must also be this temperature.
Take care before mounting that you do not mix up the left and right headlight rings. Left and right is as seen in the direction of travel (check the sticker on the inside of the rings).
INSTALLATION:
1. Pull off the adhesive strip cover, apply headlight rings to headlight glass and press firmly.
2. Check the hood to make certain that it does not touch the headlight rings when it is closed. |
|
