Used Combo; Coats 5060E Rim Clamp Tire Changer & 1050 Wheel Balancer
|
* For sale; one Combo of Used Coats 5060E Series Tire Changer & 950 Wheel Balancer that we received from a near by closing tire shop. The case was stripped down to bare metal, Bead Loosener Cylinder were rebuilt, Transmission Bearing, Seal, Hoses, Belt, air Filter-Lubricator, Air Gauge, Metal Mount/Dismount Head and New Lube Bottle (red) w/ Swab were replaced. The Coats 1001 wheel balancer is been updated to a 1050
*The Coats 5060E Series tire changers are a best seller because they pack a lot of features into a very affordable package. The manual swing arm uses one control to adjust horizontal tool head position and a second control to adjust vertical height. The 1.5 HP air drive system allows fast and powerful control of the wheel under heavy loads while still allowing the user infinite control of wheel movement.
*The 1050 Wheel Balancer is well known for their high volume productivity and accuracy. The 950 comes with Hood, 4- Passenger vehicle adaptors, Hub Nut w/ pressure drum, pressure spring and Caliper Assembly are included with the purchase
* These Machines, comes complete with new Operation Manual
*The machines were tested and serviced by Certified Professional Coats Technicians and are in excellent working condition.
These tire changer retail for over $8,500. You can buy here for a fraction of the cost !!!
|
Real Deals!!
*If you need more information; Contact Eddie Wheels at:
*We accept Visa/Master Card & Discover card, All credit cards must have confirmed address before bidding!
   
 
 
|
Coats Rim Clamp Specifications:
| Rim Diameter |
6" to 19"
|
| Rim Width |
14" Maximum |
| Tire Diameter |
50" Maximum |
| Drive System |
Air |
| Air Source (Air) |
110 to 175 PSI, 5 HP compressor, 14 to 15 SCFM @ 150 PSI |
| Chassis Footprint |
35"W x 44"D x 75"H |
| Shipping Weight |
585 lbs. | |
Coats 950,1025,1050 & 1055 Balancer Specifications:
| Balancing Modes |
5 |
| Tire Diameter |
Up to 40" |
| Rim Width |
2" to 24" |
| Max. Tire Wt. |
150 lbs. |
| Shaft Diameter |
1-1/8" or 40mm |
| Shaft Length |
6-5/8" |
| Resolution: Oz. |
0.01 |
| Resolution: Degrees |
1.4 |
| Accuracy: Oz. |
0.01 |
| Power Requirement |
220v AC, 1-3 Phase |
| Footprint |
57"W x 50"D |
| Shipping Weight |
500 lbs.
Class 110 or 150 |
|
Forms Of Payment Include:
* We accept:VISA, MC, AMX, DISCOVER CARD,r
* NO C.O.D
*Pay CREDIT CARD for quick shipping.
*All Credit cards payments must have confirmed address.
*We reserve the right to deny credit card payment based on feedback.
Buyer pays shipping/handling and packing materials. Insurance is not included in shipping price.
We strive for 100% customer
satisfaction.
|
|
